Rbk Edge 3rd Jersey Project - Page 6

plymouthrelient · 01-26-2008, 12:26 AM

I'm working on a New York Rangers 3rd. Early WIP.

wanger · 01-26-2008, 12:04 PM

Hey guys: Colorado jersey by AnaDuck. Comments Please. I don't want him to do ingame before we see if people like it. I personally think it's too monotone. He's also asking someone to make numbers for this jersey because his didn't turn out so well.
Credit: McD template and helmet, AnaDuck jersey, Dralex gloves.

Jersey:

Helmet:

CgyFlames · 01-26-2008, 12:13 PM

Colorado comments: Where's the red? And what is that logo? They're the Avalanche, not the Huskies.

Atlanta preview: Credit to L.H. for the gloves. Give me a few days and I'll package it up with L.H.'s helmets, numbers and letters and release it. (Yes, I have permission from L.H.)

wanger · 01-26-2008, 12:21 PM

@CgyFlames: That is the never used Nordiques logo! Atlanta looks good! You started Ottawa Yet?

anyway 2 more designs: Dralex gloves, McD template, AnaDuck jersey

AnaDuck · 01-26-2008, 12:21 PM

Quote:

Originally Posted by CgyFlames

Colorado comments: Where's the red? And what is that logo? They're the Avalanche, not the Huskies.

no red ^^ i adopted the nordiques colors.

i thought It'd be pretty cool to connect both teams ... personally i like the logo.

thinkfast · 01-26-2008, 12:23 PM

this is also nice like the atl stiching but i only the left logo on both shoulders doesnt look right with two also if u want on arms or sides add a third color to make it more interesting and with the previous comments i was just giving advice i cant make these and i dont even have the programs to make them

CgyFlames · 01-26-2008, 02:13 PM

Quote:

Originally Posted by AnaDuck

no red ^^ i adopted the nordiques colors.

i thought It'd be pretty cool to connect both teams ... personally i like the logo.

Ahh, Ok. That's makes sense, and it's actually pretty cool now! I take back my other post.

CgyFlames · 01-26-2008, 02:19 PM

Quote:

Originally Posted by thinkfast

this is also nice like the atl stiching but i only the left logo on both shoulders doesnt look right with two also if u want on arms or sides add a third color to make it more interesting and with the previous comments i was just giving advice i cant make these and i dont even have the programs to make them

I know your were just making suggestions. It's just that your ideas would have made it an entirely different jersey than I had in mind, and the intent of Wanger and I was to create the concept I had made, so any changes will be minimal. As it stands now is exactly how I envisioned it, so that's how it will look.

Double Post...my bad.

AnaDuck · 01-26-2008, 02:47 PM

Hey ... i need your opinion. Which of the following two jersey do you like the most

the original Colorado Nordiques/Avs

the whitened one ^^

plymouthrelient · 01-26-2008, 03:26 PM

The white oneeee

wanger · 01-26-2008, 05:06 PM

Thats what I told him lol.

wanger · 01-26-2008, 06:24 PM

Here's a WIP of my Oilers Jersey.I'm not sure about the colours of the stripes though. Socks I'm thinking Copper with same striping. Anyway comments please. Credit: McD template, DRutka Crested Oilers Logo ( I hope it's ok to use that).

Oh shoot, double post

thinkfast · 01-26-2008, 07:00 PM

everthing is great the way it is now i also like the texture of sides colors are great especially copper/gold

wanger · 01-26-2008, 07:24 PM

Thanks a lot thinkfast. Just want to say, don't be afraid though to voice your opinion. The only reason CgyFlames and me didn't want to much changed for the other jerseys was because they were made to imitate a certain concept. For this. I can change a lot. Only thing I don't really want to change is the copper/gold colour of the jersey.

Anyway, your comment is greatly appreciated!

Lol, I don't think my bottom stripes line up.

CgyFlames · 01-26-2008, 11:38 PM

Quote:

Originally Posted by wanger

Thanks a lot thinkfast. Just want to say, don't be afraid though to voice your opinion. The only reason CgyFlames and me didn't want to much changed for the other jerseys was because they were made to imitate a certain concept. For this. I can change a lot. Only thing I don't really want to change is the copper/gold colour of the jersey.

Anyway, your comment is greatly appreciated!

Yeah, I wasn't trying to be mean or anything, I just get a little defensive of my concepts, I guess.

And about that Oilers jersey...

1) Drutka might have a problem with using his logo. I'd check with him.
2) The gold color could work, but it'll need to be tweaked in order to get a good looking hue. Yellowish jerseys tend to be that way, not looking good unless they're a certain shade.

Also wanger, all your shorts are too light. darken them up to match in hue with other jerseys of that team, where applicable.

wanger · 01-27-2008, 12:53 AM

1)The centre logo is the one I took, and I'll check with him, but really, if not, AnaDuck can just crest a normal logo. It really makes no difference.

2) wait, shorts as in the pants right?

Edit: Oh gawd, I tried to get it as dark as I could but still not dark enough. I'll PM either plymouthrelient or AnaDuck cause I've can't get it any darker. It'll be up to AnaDuck to experiment with the copper ingame. This would be a lot easier if I could use DRutka's pants and just C&P them, but a logo is one thing, but pants are another.

CgyFlames · 01-27-2008, 01:02 AM

Quote:

Originally Posted by wanger

wait, shorts as in the pants right?

Yeah. Shorts, pants, short pants, or whatever I decide to call them that day.

wanger · 01-27-2008, 02:40 PM

kk, i sent the oilers one to AnaDuck. Here's the concept by hotforswayze stitched, crested etc. 2 versions, which one is better. Credit: AnaDuck touch-up, McD: jersey, Dralex: (gloves), hotforswayze: original design.

Also, should we release every jersey separately when each are done, then release a whole pack after or release a whole pack with seperate bats and a bat for all jerseys?

V1 + V2

thinkfast · 01-27-2008, 03:45 PM

v2 looks more realistic also u should release a jersy as soon as its done bc a lot of ppl probably want only their teams jersy not all any when the entire pack is released it should be as a single bat with all jersy. also are u planing to replace the ea jersys with these bc it would be better if these were extras so u could just chang the num of jersy with view

wanger · 01-27-2008, 03:58 PM

No these will be extras! For the edmonton oilers, buffalo, etc, if you have DRutka's pack or some other pack installed and you don't like one of the jerseys in the pack, then you can just change the number of the fsh file and in the bat. so that the jersey from this will overwrite that jersey.

Anyway so thats 1 for release ASAP

thinkfast · 01-27-2008, 04:54 PM

great that these will be extras also are rangers going to be started soon

sonicity · 01-27-2008, 07:09 PM

Quick-ish try at a PGH alt... thoughts?

SweNJDFan · 01-27-2008, 07:26 PM

I think it's to much gold! Otherwise it's kinda nice!

sonicity · 01-27-2008, 07:31 PM

Thanks. I was trying to stay in theme with the two jerseys they have already, which are dominated by white and by black, respectively... thought maybe I could make the whole arm black, but I wanted the numbers to "pop" as well.

thinkfast · 01-27-2008, 09:37 PM

not too much gold for the reasons u stated and that it looks great do not change

wanger · 01-27-2008, 11:15 PM

Although that is a nice design, I don't think the colour will look well ingame. Play around with it. Also, maybe add a few things so it isn't just a recoloured jersey. Finally if you plan to contribute to this project, please let us know. I don't want to send a PM to every person asking them is this part of the project? (although if it's in here I assume it is)

Doran can't get on NHLDepot so here's what he wanted me to post.

Quote:

Behold, my latest catastrophe.

I decided to completely get rid of the previous stitching and mesh, so it's not distracting. AnaDuck (or me, if I figure it out) can add it all later.

Edit: Also, shrink the logo on the penguins jersey. Otherwise, it's nice even if it is a recolour.

List updated!

By the way, it's now 1 for singles and pack and 1 for just pack

Finally, I was thinking of taking a picture of my Oilers jersey for the logo, would that be better than cresting?

CgyFlames · 01-28-2008, 11:26 AM

I've missed a lot. Some assorted comments...

1) wanger: Don't use a picture of your Oilers jersey for the logo. It WILL look terrible. Also, I think that elements ust be weird if you cant darken the color at all. I'm not even using Photoshop and I have no trouble getting the right color.

2) The Pit jersey looks nice. I'd even keep the white socks and white helmets from their regular jersey.

3) I prefer the whitened Avs jersey.

4) I vote for individual releases, then a complete pack.

BTW, can someone explain to me how to use multi-quote? I tried to use it for this message but had no success.

wanger · 01-28-2008, 03:47 PM

The problem with elements is that it can't do groups. Because of that, if I colour something using a normal paint bucket thing, then it will go over the "texture". The pant will look like black piece of paper. So I have to use colour which colours over the colour on the pant. If there is a white colour, it will be light. It's like mixing colours but not really.

Anyway, yea the pictures I took of my jersey didn't look that good.

Because we have so many jersey makers who all want to show off their work, we have decided to do seperate releases, followed by a pack. So expect CgyFlames's two jerseys soon, along with Washington and Florida, followed by Boston and Colorado, and maybe an Edmonton and another Atlanta.

krt · 01-28-2008, 06:18 PM

Wow, you can't take those Pens seriously!? Too much gold...!!!

Btw what about to try different logo? The text NOT the penguin. S/t like this... in gold and black. But more crested...

Then you can change the colour of the whole jersey to more white...

sonicity · 01-28-2008, 06:59 PM

do we need another white-dominated jersey? There's already a white dominated rbk, and several mostly-white throwback jerseys... nothing featuring the gold yet. I dunno...